• For details about [Auto Del. Temp] and [Auto Del.Stored], see "Maintenance Menu".
• p.132 "Checking the Error Log"
• p.145 "Maintenance Menu"
Printing a Sample Print file
The following procedure describes how to print a Sample Print file with the PCL 6/5e, RPCS or PostScript
3 printer driver.
• Applications with their own drivers, such as PageMaker, do not support this function.
Sending a Sample Print file
1. From an application, select a command to print.
The Print dialog box appears.
2. Select the printer you want to use in the Name list, and then click [Properties].
The printer properties dialog box appears.
3. In the [Job type:] box, click [Sample Print].
When printing with the PostScript 3 printer driver, click [Sample Print] in the [Job Type:] box on the
[Job Log] tab.
4. Click [Details...], and then enter a user ID in the [User ID:] box.
This is used to identify the user. The user ID can be entered using up to eight alphanumeric (a-z, A-Z,
0-9) characters.
5. Execute a command to print.
Make sure to set more than two copies.
The Sample Print job is sent to the printer, and the first set is printed.
Printing a selected Sample Print file only
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [
] or [ ] key to display [Sample Print], and then press the [ Enter] key.
3. Printing Stored Documents
98
To Next Page
Loading...
Need help?
General
