2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
A list of printers using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
3. In the list, select a printer you want to manage.
4. On the [Tools] menu, click [User Management Tool].
The dialog box for entering the user name and password appears.
5. Enter the user name and password, and then click [OK.]
Enter the same user name and password you enter to log on to the Web Image Monitor. For details
about the user name and password, consult your administrator.
User Management Tool starts.
• For details about User Management Tool, see SmartDeviceMonitor for Admin Help.
Displaying the number of sheets printed
Follow the procedure below to display the number of sheets printed under each user.
1. Start SmartDeviceMonitor for Admin User Management Tool.
2. Click the [User Counter Information] tab of User Management Tool.
The number of pages printed under each user appears.
Using SmartDeviceMonitor for Admin
199
To Next Page
Loading...
Need help?
General
