Main SP Tables-8
SM Appendix 3-113 D255/D256/M281/M282
8231 Scan PGS/Mode *CTL [0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
001
Large Volume Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
002
SADF Selectable. Feeding pages one by one through
the ADF.
003
Mixed Size Selectable. Select "Mixed Sizes" on the operation
panel.
004
Custom Size Selectable. Originals of non-standard size.
005
Platen Book mode. Raising the ADF and placing the
original directly on the platen.
006
Mixed 1side/2side Simplex and Duplex mode.
If the scan mode is changed during the job, for example, if the user switches from ADF to
Platen mode, the count is done for the last selected mode.
The user cannot select mixed sizes or non-standard sizes with the fax application so if the
original's page sizes are mixed or non-standard, these are not counted.
If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is
enabled.
In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with
SADF, the Platen count is 1 and the SADF count is 3.
8241 T:Scan PGS/Org *CTL [0 to 99999999/ 0 / 1/step]
These SPs count the total number of scanned pages by original type for all
jobs, regardless of which application was used.
8242 C:Scan PGS/Org *CTL [0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by original type for Copy jobs.
8243 F:Scan PGS/Org *CTL [0 to 99999999/ 0 / 1/step]
These SPs count the number of pages scanned by original type for Fax jobs.
To Next Page
Loading...
