Printer Service Mode
D255/D256/M281/M282 3-152 SM Appendix
1001 Bit Switch
bit 0
to 2
DFU - -
bit 3 IPDS print-side reversal Disabled Enabled
If enabled, the simplex pages of IPDS jobs will be printed on the front side
because of printing on the back side of the page. This might reduce
printing speed.
bit 4
to 5
DFU - -
bit 6 Not used - -
bit 7 DFU - -
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0 Not used - -
bit 1 Multiple copies if a paper size or type
mismatch occurs
Disabled
(Single
copy)
Enabled
(Multiple
copy)
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSwitch, the
device can be configured to print all copies even if a paper mismatch
occurs.
bit 2 Prevent SDK applications from altering
the contents of a job.
Disabled Enabled
If this BitSwitch is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSwitch is for troubleshooting the effects
of SDK applications on data.
bit 3 [PS] PS Criteria Pattern3 Pattern1
To Next Page
Loading...
