Bit Switches - 2
D255/D256 FAX OPTION 92 SM
4 Receiver name printed on the
transmission result report
Selects the printing target on the transmission
result report.
0: All receivers
1: Printing only receivers which have received
fax transmission.
5-7 Not used. Do not change the settings.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
0* Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width
as the received data is selected first.
1: A paper size which has enough length
to print all the received lines without
reduction is selected first.
1* Paper size selected for printing A4
width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size
is selected for printing A4 width fax data,
when the machine has both A4 and 8.5" x
11" size paper.
2 Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
3-4 Printing the sample image on reports "Same size" means the sample image is
To Next Page
Loading...
