Bit Switches - 2
SM 93 D255/D256 FAX OPTION
FAX OPTION
Bit 4 Bit 3 Setting printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4
must be set to "0" to enable this switch.
0 0 The upper half only
0 1 50% reduction
(sub-scan only)
1 0 Same size
1 1 Not used
5-6 Not used Do not change the settings.
7 Equalizing the reduction ratio among
separated pages
(Page Separation)
0: Enabled
1: Disabled
0: When page separation has taken
place, all the pages are reduced with the
same reduction ratio.
1: Only the last page is reduced to fit the
selected paper size when page
separation has taken place. Other pages
are printed without reduction.
* This setting can be used for the client machine which has no FCU.
Printer Switch 0F (SP No. 1-103-016)
No Function Comments
0-1* Smoothing feature (0, 0) (0, 1): Disable smoothing if the
machine receives halftone images from
other manufacturers fax machines
frequently.
Bit 1 Bit 0 Setting
0 0 Disabled
0 1 Disabled
1 0 Enabled
1 1 Not used
2* Duplex printing
0: Disabled
1: Enabled
1: The machine always prints received
fax messages in duplex printing mode:
To Next Page
Loading...
