Ricoh M281 Series - Page 964

Dedicated Transmission Parameters
D255/D256 FAX OPTION 130 SM
No FUNCTION COMMENTS
0-3 Initial TX modem rate If training with a particular remote terminal
always takes too long, the initial modem rate
may be too high. Reduce the initial TX
modem rate using these bits.
For the settings 14.4 or kbps slower, Switch
04 bit 4 must be changed to 0.
 Do not use settings other than listed
on the left. If the setting is
"Disabled", the bit switch setting is
used.
Bit3 Bit2 Bit1 Bit0 bps
0 0 0 0 Not used
0 0 0 1 2400
0 0 1 0 4800
0 0 1 1 7200
0 1 0 0 9600
0 1 0 1 12000
0 1 1 0 14400
0 1 1 1 16800
1 0 0 0 19200
1 0 0 1 21600
1 0 1 0 24000
1 0 1 1 26400
1 1 0 0 28800
1 1 0 1 31200
1 1 1 0 33600
1 1 1 1 Disabled
Other settings: Not used
4-7 Not used Do not change the settings.
Switch 03
No FUNCTION COMMENTS