Ricoh MET-C1 - Copy Data Security Unit Type G; Accessory Check; Installation Procedure

Copy Data Security Unit Type G
Accessory Check
No. Description Q’ty
1 PCB:ICIB-3 1
2 BRACKET:ICIB:ALEX 1
3 SCREW:M3X4 2
4 SCREW:M3X6 4
- TAPPING SCREW:3X8 2
- SPACER:SQ-7 1
- BRACKET:ICIB:GRIFFIN-C1 1
Installation procedure
• When you install this option, switch the MFP’s power supply OFF, and unplug the power plug from
the mains outlet.
• If it is installed when the power is on, it will result in an electric shock or malfunction.
1. Rear cover (page 230)
2. Installation
178