Ricoh MET-C1 - Service Call 700-792; SC700 (Engine: Peripherals)

Service Call 700-792
SC700 (Engine: Peripherals)
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC701-03 D Paper Feed Motor Driver Error (ARDF)
Detection of error signal from motor driver
• Encoder disconnection
• Encoder connector dropout
• Encoder defective
• Overload
• Motor deterioration
• Replace the encoder harness
• Check the harness connection
• Replace the motor
SC701-08 D Paper Exit Motor Driver Error (ARDF)
Detection of error signal from motor driver.
• Encoder disconnection
• Encoder connector dropout
• Encoder defective
• Overload
• Motor deterioration
• Replace the encoder harness
• Check the harness connection
• Replace the motor
Service Call 700-792
539