Ricoh MET-C1 - Bcu; When Installing the New BCU

1. IPU [A] ( ×6, ×12)
BCU
• The FFC connector has a lock mechanism. Do not use force to pull it out.
1. Rear cover (page 230)
2. BCU [A] ( ×2, ×4)
When installing the new BCU
Remove the NVRAM from the old BCU. Then install it on the new BCU after you replace the BCU.
Replace the NVRAM (page 395) if the NVRAM on the old BCU is defective.
4. Replacement and Adjustment
394