2. Insert the PS3 SD card in SD card slot 1 [A].
• When installing more than one SD card, perform the merge operation.
3. Switch the power ON.
4. Attach the SD card slot cover.( ×1)
5. Stick the "Adobe PostScript3" decal on the front face of the MFP.
6. After switching the power ON, check that the system settings list is output, and that the
option is recognized correctly.
• The PDF firmware installed as standard contains a program required to print PS3 data as default.
However, this PS3 program is normally disabled.
• The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the PS3
firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this specification, the
self-diagnosis result report shows the ROM part number/software version of the PDF firmware
contained in the PS3 program.
Postscript3 Unit Type M3
203
To Next Page
Loading...
