Ricoh MET-C1 - Page 424

1
ID max: (K, C, M, and
Y)
Adjust the offset value so that
the density of level 10 matches
that of level 10 on the C-4
chart.
2
Middle (Middle ID)
(K, C, M, and Y)
Adjust the offset value so that
the density of level 6 matches
that of level 6 on the C-4 chart.
3
Shadow (High ID)
(K, C, M, and Y)
Adjust the offset value so that
the density of level 8 matches
that of level 8 on the C-4 chart.
4
Highlight (Low ID)
(K, C, M, and Y)
Adjust the offset value so that
dirty background does not show
on the copy and the density of
level 3 is slightly lighter than that
of level 3 on the C-4 chart.
- Text (Letter) Mode, Single Color -
Item to Adjust Level on the C-4 chart (K) Adjustment Standard
1 ID max: (K)
Adjust the offset value so that
the density of level 10 matches
that of level 10 on the C-4
chart.
2 Middle (Middle ID) (K)
Adjust the offset value so that
the density of level 6 matches
that of level 6 on the C-4 chart.
3 Shadow (High ID) (K)
Adjust the offset value so that
the density of level 8 matches
that of level 8 on the C-4 chart.
4 Highlight (Low ID) (K)
Adjust the offset value so that
dirty background does not show
on the copy and the density of
level 3 is slightly lighter than that
of level 3 on the C-4 chart.
4. Replacement and Adjustment
422