SC No. Level Error Name/Error Condition/Major Cause/Solution
SC842-02 B
Number of times of Nand-Flash block erase exceeding the threshold
When the status of the Nand-Flash was checked at power-on or when
returning from energy saver mode, the number of times the block was
erased exceeded the threshold.
Number of times of Nand-Flash block erase exceeding the threshold
Replace the controller board.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC853-00 B
Bluetooth device connection error
The Bluetooth hardware (USB type) was connected after the machine
was turned on.
The Bluetooth hardware (USB type) was connected after the machine
was turned on.
Turn the main power with the Bluetooth hardware (USB type) connected.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC854-00 B
Bluetooth device disconnected
The Bluetooth hardware (USB type) was disconnected after the machine
was turned on.
The Bluetooth hardware (USB type) was disconnected after the machine
was turned on.
Turn the main power with the Bluetooth hardware (USB type) connected.
5. Troubleshooting
556
To Next Page
Loading...
