EasyManua.ls Logo

Ricoh MET-C1 - Page 619

Ricoh MET-C1
688 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SC No. Level Error Name/Error Condition/Major Cause/Solution
The NetFile file management on the HDD cannot be used, or a NetFile
management file is corrupted and operation cannot continue.
HDD defective
HDD inconsistency caused by power failure during HDD access,
etc.
Software bug
If another SC related to HDD errors (SC860 to SC865) is issued at the
same time, the HDD is the cause. Solve the other SC.
If SC860 to SC865 is not issued
Turn the main power off/on.
If this does not work, initialize the HDD NetFile partition
(SP5-832-011). Approval by the customer is required because
received fax message waiting to be delivered and documents
waiting to be captured will be lost.
Procedure:
1. Go into the User Tools mode and do "Delivery Settings" to
print all received fax documents that are scheduled for
delivery. Then erase them.
2. In the User Tools mode, do Document Management>
Batch Delete Transfer Documents.
3. Do SP5832-011, then turn the machine power off and
on.
If this does not solve the problem, initialize all partitions of the
HDD (SP5-832-001), then turn the machine power off and on.
Approval by the customer is required because documents and
Address Book information in the HDD will be lost. Received fax
messages stored are protected but the order may be changed.
If this does not solve the problem, replace the HDD.
Service Call 900-998
617

Table of Contents

Related product manuals