9. Press [Change].
10. Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
11. Press [Exit].
12. Press [
Next].
13. In "Available Functions", select which of the machine's functions you want to permit.
If the function you want to select is not displayed, press [ Next].
LDAP authentication will be applied to the selected functions.
Users can use the selected functions only.
2. Configuring User Authentication
56
To Next Page
Loading...
