5. Press [Auto Erase Memory Setting].
6. Press [On].
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
8. Press [Change].
9. Enter the number of times that you want to overwrite using the number keys, and then
press [
].
10. Press [OK].
Auto Erase Memory is set.
11. Log out.
• If you enable both overwriting and data encryption, the overwriting data will also be encrypted.
Canceling Auto Erase Memory
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] three times.
5. Press [Auto Erase Memory Setting].
6. Press [Off].
7. Press [OK].
Auto Erase Memory is disabled.
8. Log out.
Deleting Data on the Hard Disk
109
To Next Page
Loading...
