Ricoh MP C2503 Series

Protocol Port Setting method When disabled
HTTP TCP:80 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
Functions that require HTTP cannot
be used.
Cannot print using IPP on port 80.
HTTPS TCP:443 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
Functions that require HTTPS cannot
be used.
@Remote cannot be used.
You can also make settings to require
SSL transmission using the control
panel or Web Image Monitor.
SMB TCP:139 • Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
SMB printing functions cannot be
used.
NBT UDP:137
UDP:138
• telnet SMB printing functions via TCP/IP,
as well as NetBIOS designated
functions on the WINS server cannot
be used.
SNMPv1,v2 UDP:161 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
Functions that require SNMPv1, v2
cannot be used.
Using the control panel, Web Image
Monitor or telnet, you can specify
that SNMPv1, v2 settings are read-
only, and cannot be edited.
5. Enhanced Network Security
118