Ricoh MP C2503 Series User Manual

Protocol Port Setting method When disabled
SNMPv3 UDP:161 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
Functions that require SNMPv3
cannot be used.
You can also make settings to require
SNMPv3 encrypted transmission and
restrict the use of other transmission
methods using the control panel,
Web Image Monitor, or telnet.
RSH/RCP TCP:514 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
Functions that require RSH and
network TWAIN functions cannot be
used.
You can restrict personal information
from being displayed by making
settings on the control panel using
"Restrict Display of User Information".
LPR TCP:515 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
LPR functions cannot be used.
You can restrict personal information
from being displayed by making
settings on the control panel using
"Restrict Display of User Information".
IPP TCP:631 • Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Device Manager NX
Lite
• Remote
Communication Gate S
IPP functions cannot be used.
Enabling and Disabling Protocols
119

Ricoh MP C2503 Series Specifications

General

Functions	Print, Copy, Scan
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Automatic Duplexing	Yes
Paper Output Capacity (Standard)	500 sheets
Processor	600 MHz
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Power Source	220 - 240 V, 50/60 Hz
Print Speed	25 ppm (Black/Color)
Connectivity	USB, Ethernet
Copy Speed	25 ppm (Black/Color)
Zoom	25% - 400%
Scan Speed	Up to 54 ipm (Black/Color)
Paper Input Capacity (Standard)	350 sheets
Paper Size	A3, A4, A5, B4, B5
Paper Weight	60 - 220 g/m²
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac OS