Monitoring and Configuring the Printer
94
2
Note
❒ For details about UNIX commands, see UNIX Supplement.
❒ Check the error contents that may be printed in the configuration page. For
details about printing a configuration page, see Printer Reference.
Replace Develop. Unit (Magenta) It is time to replace the development unit (magenta).
Replace Develop. Unit (Yellow) It is exchange time of the development unit (yellow).
Replace Feed Belt It is time to replace the feed belt.
Replace Feed Roller It is time to replace the transfer roller.
Replace Fuser Oil Unit It is time to replace the fuser oil unit.
Replace Fusing Unit It is time to replace the fusing unit.
Replace PCU It is time to replace the photoconductor unit.
Replace PCU(Color) It is time to replace the photoconductor unit(Color).
Replace Sustainer Unit It is time to replace the sustainer unit.
Replace Toner Suction Motor It is time to replace the toner suction motor.
Replace Transfer Belt It is time to replace the transfer belt.
Replace Transfer Cleaning Unit It is time to replace the transfer cleaning unit.
Retarding... Printing has stopped momentarily to allow printed
sheets to dry.
SD Card Authentication failed SD card authentication failed.
Setting Remotely The RDS setting is being processed.
Shift Tray Internal output tray is full.
Skipped due to Error Skipped the error.
Storage Complete The storage is complete.
Storage Failed The storage has failed.
Supplies Order Call failed The supply order call has failed.
Suspend / Resume Key Error Finisher stop button was pressed.
Transmission Aborted The transmission was interrupted.
Transmission Complete The transmission completion was completed.
Transmission Failed The transmission has failed.
Tray Error: Chaptering The paper feed tray specification error has occurred
because chaptering as well as the normal paper use
the same tray for printing.
Tray Error: Duplex Printing Selected paper tray cannot be used for duplex printing.
Unit Left Open: ADF Document feeder is opened.
Waiting for Job Suspension The machine is waiting for Job Suspension.
Warming Up... The machine is warming up.
Messages Description
To Next Page
Loading...
Need help?
General
