Ricoh Printer/Scanner Unit Type 8000 Network Guide

Monitoring and Configuring the Printer
70
2
ipv6
Use the “ipv6” command to display
and configure IPv6 settings.
❖ View Setting
msh> ipv6
❖ IPv6 stateless address
msh> ipv6 stateless {on|off}
lpr
Use the “lpr” command to view and
configure LPR settings.
❖ View Setting
msh> lpr
❖ Checking host name when deleting
the job
msh> lpr chkhost {on|off}
netware
Use the “netware” command to view
and configure the NetWare settings
such as the print server name or file
server name.
❖ Netware Printer Server Names
msh> netware pname charac-
ter string
• Enter the NetWare print server
name using up to 47 characters.
❖ Netware File Server Names
msh> netware fname charac-
ter string
• Enter the NetWare file server
name using up to 47 characters.
❖ Encap type
msh> netware encap {802.3|
802.2|snap|ethernet2|auto}
❖ Remote Printer Number
msh> netware rnum {0–254}
❖ Timeout
msh> netware timeout {3–255}
❖ Printer server mode
msh> netware mode pserver
msh> netware mode ps
❖ Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
❖ NDS context name
msh> netware context char-
acter string
❖ SAP interval
msh> netware “sap_interval”
❖ Setting login mode for file server
msh> netware login server
❖ Setting login mode for NDS tree
msh> netware login tree
❖ Setting login mode for NDS tree name
msh> netware tree “NDS
name”
❖ File transfer protocol
msh> netware trans {ipv4pri|
ipxpri|ipv4|ipx}
• If you do not specify the proto-
col, the current setting is dis-
played.
Protocol Set Protocol
ipv4pri IPv4+IPX(IPv4)
ipxpri IPv4+IPX(IPX)
ipv4 IPv4
ipx IPX

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English