Ricoh Printer/Scanner Unit Type 8000 Network Guide

Using SmartDeviceMonitor for Admin
43
2
• Using Address Management Tool,
you can manage LAN-Fax num-
bers, user names for Scan to Fold-
er, and addresses for sending and
receiving Internet faxes.
• The e-mail sender’s name and
folder can be protected.
Installing SmartDeviceMonitor
for Admin
Follow the procedure below to install
SmartDeviceMonitor for Admin
A Quit all applications currently running.
B Insert the CD-ROM into the CD-
ROM drive.
The installer starts.
C Select an interface language, and
then click [OK].
The following languages are avail-
able: Czech, Danish, German, Eng-
lish, Spanish, French, Italian,
Hungarian, Dutch, Norwegian,
Polish, Portuguese , Finnish,
Swedish, Chinese Simple and Chi-
nese Traditional.
D Click [SmartDeviceMonitor for Admin].
E Click [Next >].
The software license agreement
appears in the [License Agreement]
dialog box.
F After reading through its contents,
click [Next >].
G Follow the instructions on the screen.
A message appears when the in-
stallation is completed.
H Click [OK].
A message about restarting the
computer may appear. Restart the
computer to complete installation.
Note
❒ Auto Run may not work under
certain operating system set-
tings. In this case, launch “Set-
up.exe” located on the CD-
ROM root directory.
❒ If you are required to restart the
computer after installing Smart-
DeviceMonitor for Admin, re-
start the computer and continue
the configuration.
Changing the Network
Interface Board Configuration
Follow the procedure below to
change the network interface board
configuration using SmartDevice-
Monitor for Admin.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C In the list, select a machine whose
configuration you want to change.

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English