EasyManuals Logo

Ricoh Printer/Scanner Unit Type 8000 Network Guide

Ricoh Printer/Scanner Unit Type 8000
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Precautions
123
4
NetWare Printing
Form feed
You should not configure form feed
on NetWare. Form feed is controlled
by the printer driver on Windows. If
NetWare form feed is configured, the
printer might not work properly. If
you want to change form feed set-
tings, always configure them using
Windows.
Under Windows 95/98/Me, clear
the [Form feed] check box on the
[Printer Settings] tab in the printer
properties dialog box.
Under Windows 2000/XP and
Windows Server 2003, clear the
[Form feed] check box on the [Net-
Ware Settings] tab in the printer
properties dialog box.
Under Windows NT 4.0, clear the
[Form feed] check box on the [Net-
Ware Settings] tab in the printer
properties dialog box.
Banner page
You should not configure a banner
page on NetWare. If you want to
change the banner page setting, al-
ways configure it using Windows.
Under Windows 95/98/Me, clear
the [Enable banner] check box on the
[Printer Settings] tab in the printer
properties dialog box.
Under Windows 2000/XP and
Windows Server 2003, clear the
[Enable banner] check box on the
[NetWare Settings] tab in the printer
properties dialog box.
Under Windows NT 4.0, clear the
[Enable banner] check box on the
[NetWare Settings] tab in the printer
properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the
connection from the print server will
be cut off for about 30-40 seconds be-
fore re-connecting. Depending on the
NetWare specification, print jobs may
be accepted, but they will not be
printed during this interval.
When using the machine as a remote
printer, wait about two minutes after
resetting before attempting to print.
When the optional IEEE
802.11b interface unit Is
Installed
When using the wireless LAN interface
on the network, note the following:
When moving the machine
Detach the antennas when relocat-
ing the machine locally.
After moving the machine, reat-
tach the antennas, ensuring that:
The antennas are positioned
clear of obstacles.
There is 40 to 60 mm between
the antennas, so that they do not
touch.
The exposure glass cover and the
Auto Document Feeder (ADF)
do not knock the antennas.

Table of Contents

Other manuals for Ricoh Printer/Scanner Unit Type 8000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Printer/Scanner Unit Type 8000 and is the answer not in the manual?

Ricoh Printer/Scanner Unit Type 8000 Specifications

General IconGeneral
BrandRicoh
ModelPrinter/Scanner Unit Type 8000
CategoryAll in One Printer
LanguageEnglish

Related product manuals