Ricoh Printer/Scanner Unit Type 8000 Network Guide

Using a Printer Server
30
1
H Confirm the settings, and then
click [OK].
Configuration is now complete.
Wait several minutes before re-
starting Web Image Monitor.
I Click [Logout].
Reference
p.26 “Setting Up as a Print Serv-
er (NetWare 3.x)”
Setting Up as a Remote Printer
(NetWare 3.x)
Follow the procedure below to use
the machine as a remote printer un-
der NetWare 3.x.
Setting up using PCONSOLE
A Enter “PCONSOLE” from the
command prompt.
F:> PCONSOLE
B Create a print queue.
When using the existing print
queue, go to the procedure for cre-
ating a printer.
C From the [Available Options] menu,
select [Print Queue Information], and
then press the {Enter} key.
D Press {Insert} key, and then enter a
print queue name.
E Press {Esc} key to return to the
[Available Options] menu.
F Set up the network connection to
a printer.
G On the [Available Options] menu,
click [Print Server Information], and
then press the {Enter} key.
H To create a new print server, press
the {Insert} key, and then enter a
print server name.
For a currently defined print serv-
er, select a print server in the [Print
Server] list.
Use the same printer name speci-
fied using NIB Setup Tool.
I From the [Print Server Information]
menu, select [Print Server Configura-
tion].

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English