Ricoh Printer/Scanner Unit Type 8000 Network Guide

Using a Printer Server
32
1
G Click [Configuration] in the left ar-
ea, and then click [NetWare].
H Confirm the settings, and then
click [OK].
Configuration is now complete.
Wait several minutes before re-
starting Web Image Monitor.
I Click [Logout].
Reference
p.26 “Setting Up as a Print Serv-
er (NetWare 3.x)”
Setting Up as a Remote Printer
(NetWare 4.x, 5 / 5.1, 6 / 6.5)
Follow the procedure below to use
the printer as a remote printer under
NetWare 4.x, 5 / 5.1 and 6 / 6.5.
Important
❒ To use the printer as a remote
printer under NetWare 4.x, 5 / 5.1,
6 / 6.5, set it to NDS mode.
❒ Do not use the printer as a remote
printer when Pure IP is used.
Setting up using NWadmin
A From Windows, start NWadmin.
For details about NWadmin, see
the NetWare manuals.
B Set up the network connection to
a print queue. Select the object in
which the print queue is located
in the directory tree, and then
click [Create] on the [Object] menu.
C In the [Class of new object] box,
click [Print Queue], and then click
[OK].
D In the [Print Queue Name] box, enter
the name of the print queue.
E In the [Print Queue Volume] box,
click [Browse].
F In the [Available objects] box, click
the volume in which the print
queue is created, and then click
[OK].
G Check the settings, and then click
[Create].

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English