EasyManuals Logo

Ricoh Printer/Scanner Unit Type 8000 Network Guide

Ricoh Printer/Scanner Unit Type 8000
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
Using DHCP
119
4
Using DHCP
You can use the printer in a DHCP en-
vironment. You can also register the
printer NetBIOS name on a WINS
server when it is running.
If you connect an Ethernet interface
and IEEE 1394 (IPv4 over 1394) inter-
face simultaneously, pay attention to
the following:
When a static IPv4 address is set for
both interfaces
IPv4 Address: If interface IPv4
addresses overlap, the Ethernet
interface is selected.
Subnet Mask: If interface subnet
masks overlap, the Ethernet in-
terface is selected.
Gateway Address: The selected
value is applied. Make the gate-
way address setting inside the
subnet set in the interface. If a
value is beyond the range of the
subnet selected by the interface,
the machine operates using
"0.0.0.0".
When obtaining addresses from the
DHCP server
IP Address, Subnet Mask: you
can configure addresses as-
signed by a DHCP server. If IP
addresses overlap or the same
subnet IP addresses are select-
ed, the effective value is as-
signed only to the prioritized
interface. Ethernet has default
interface priority.
AutoNet: A temporary IPv4 ad-
dress starting with 169.254 and
not used on the network, is as-
signed to the prioritized inter-
face.
Default interface priority is
IEEE 1394 (IPv4 over 1394).
Gateway Address, DNS Server
Address, and Domain Name:
You can configure the addresses
assigned by DHCP to the prior-
itized interface.
If the gateway address is be-
yond the range of the subnet se-
lected for the interface, the
machine operates using
"0.0.0.0".
Ethernet has default interface
priority.
When there are static IP addresses
and addresses assigned by DHCP
IPv4 Address and subnet mask:
if a static IPv4 address is the
same as an address assigned by
DHCP, or the static subnet
mask address and the subnet
mask address assigned by
DHCP overlap, the machine
uses the static IPv4 address in-
terface. The interface with the
DHCP setting is set by default.
Gateway Address: operates using
the address entered manually.
If a static address is not selected,
or is set to 0.0.0.0, the interface
using the address assigned by
DHCP is used.
Note
Printers that register the printer
NetBIOS name on a WINS server
must be configured for the WINS
server.
Supported DHCP servers are Mi-
crosoft DHCP Server included
with Windows 2000 Server, Win-
dows Server 2003, and Windows
NT 4.0, and the DHCP server in-
cluded with NetWare and UNIX.

Table of Contents

Other manuals for Ricoh Printer/Scanner Unit Type 8000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Printer/Scanner Unit Type 8000 and is the answer not in the manual?

Ricoh Printer/Scanner Unit Type 8000 Specifications

General IconGeneral
BrandRicoh
ModelPrinter/Scanner Unit Type 8000
CategoryAll in One Printer
LanguageEnglish

Related product manuals