Monitoring and Configuring the Printer
42
2
Using SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Ad-
min, you can monitor the network
printers. Also, you can change the
configuration of the network inter-
face board using TCP/IP or IPX/SPX.
Important
❒ IPv6 cannnot be used on this function.
❖ Protocol stack provided with Operat-
ing System
• Windows 95/98/Me
TCP/IP
IPX/SPX
NetWare
NetWare Client32 for Windows 95
IntraNetWare Client for Win-
dows 95
Novell Client for Windows
95/98/Me
• Windows 2000
TCP/IP
IPX/SPX
NetWare
Novell Client for Windows
NT/2000/XP
• Windows Server 2003
TCP/IP
IPX/SPX
•Windows XP
TCP/IP
IPX/SPX
Novell Client for Windows
NT/2000/XP
•Windows NT 4.0
TCP/IP
IPX/SPX
Client Service for NetWare
NetWare Client32 for Windows NT
IntraNetWare Client for Win-
dows NT
Novell Client for Windows
NT/2000/XP
❖ Available operations
The following functions are available:
• Limits settings done from the
control panel, and disables
changes made to certain items.
• Enables selection of paper type
loaded in the machine.
• Switches to, and comes out of
Energy Saver mode.
• Checks information about print-
ing, paper quantity, etc.
• Simultaneously monitors multi-
ple printers. When there are
many printers, you can create
groups and classify printers to
facilitate management.
• Checks the machine's network
settings and detailed device in-
formation.
• Enables you to change the ma-
chine's network settings.
• You can check details of print
jobs sent from a computer.
• Allows you to check job histo-
ries of printed, faxed (LAN-
Fax), scanned, and photocopied
documents identified by user
codes.
• Allows selection of functions
such as printing and scanning
for each user code.
• Fax numbers and e-mail address-
es stored in the machine can be
changed and saved by computer.
• You can check each fax job his-
tory entry.
• You can make settings for and
display the status changes of
group devices.
To Next Page
Loading...
Need help?
General
