To Next Page

To Previous Page

Understanding the Displayed Information

101

SMB SMB settings

Switch

Mode

Direct print

Notification

Workgroup name

Computer name

Comment

Share name [1]

Protocol

IPv4 over 1394 IPv4 over 1394 settings

Host name

DHCP

Address

Netmask

Broadcast

DNS Domain

SCSI print

Bidi

IEEE 802.11b IEEE 802.11b settings

Host Name

Communication mode

SSID

Channel range

Channel

TX Rate

Security

WEP Authentication

WEP Encryption key number

WEP encryption

WEP Encryption keys [X] X can be set between 1 and 5.

WPA Encryption

WPA Authentication

Pre-Shared Key

User name

Item Description

Manuals for this Machine3
- Table of Contents5
How to Read this Manual9
- Symbols9
Setting up the Machine on a Network10
- Initial Settings Overview10
- Initial Settings13
1 Using a Printer Server31
Preparing Printer Server31
- Printing Notification Via Smartdevicemonitor for Client32
Using Netware33
- Setting up as a Print Server (Netware 3.X)34
- Setting up as a Print Server (Netware 4.X, 5 / 5.1, 6 / 6.5)35
- Using Pure IP in the Netware 5 / 5.1 or 6 / 6.5 Environment36
- Setting up as a Remote Printer (Netware 3.X)38
- Setting up as a Remote Printer (Netware 4.X, 5 / 5.1, 6 / 6.5)40
2 Monitoring and Configuring the Printer43
Using Web Image Monitor43
- Displaying Top Page45
- When User Authentication Is Set46
- About Menu and Mode47
- Access in the Administrator Mode49
- Displaying Web Image Monitor Help49
Using Smartdevicemonitor for Admin50
- Installing Smartdevicemonitor for Admin51
- Changing the Network Interface Board Configuration51
- Locking the Menus on the Machine's Control Panel52
- Changing the Paper Type53
- Managing User Information53
- Configuring the Energy Saver Mode56
- Setting a Password56
- Checking the Machine Status57
- Changing Names and Comments57
- Load Fax Journal58
- Viewing and Deleting Spool Print Jobs59
- Managing Address Information59
Using Smartdevicemonitor for Client60
- Monitoring Printers60
- Checking the Machine Status60
- When Using IPP with Smartdevicemonitor for Client61
Printer Status Notification by E-Mail62
- Auto E-Mail Notification63
- On-Demand E-Mail Notification64
- Mail Authentication64
- On-Demand E-Mail Notification65
Remote Maintenance by Telnet67
- Using Telnet67
- Access68
- Appletalk69
- Authfree69
- Autonet69
- Bonjour(Rendezvous)70
- Btconfig71
- Devicename71
- Dhcp72
- Diprint73
- Dns73
- Domainname75
- Help75
- Hostname75
- Ifconfig76
- Info77
- Ipp77
- Ipv678
- Lpr78
- Netware78
- Passwd79
- Prnlog79
- Route79
- Set80
- Show82
- Slp82
- Smb82
- Snmp83
- Sntp85
- Spoolsw86
- Sprint86
- Ssdp86
- Ssh87
- Status87
- Syslog87
- Upnp87
- Web88
- Wiconfig89
- Wins92
Snmp93
Getting Printer Information over the Network94
- Current Printer Status94
- Printer Configuration103
Understanding the Displayed Information104
- Print Job Information104
- Print Log Information105
- Configuring the Network Interface Board106
Message List113
- System Log Information113
Printing Files Directly from Windows121
- Setup121
- Using a Host Name Instead of an Ipv4 Address121
- Printing Commands123
3 Special Operations under Windows121
4 Appendix125
When Using Windows Terminal Service / Metaframe125
- Operating Environment125
- Supported Printer Drivers125
- Limitations125
Using DHCP127
- Using Autonet128
Precautions129
- Connecting a Dial-Up Router to a Network129
- Netware Printing131
- When the Optional IEEE 802.11B Interface Unit Is Installed131
Information about Installed Applications133
- Rsa ® Bsafe133
Specifications134
Index136

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English

Ricoh Printer/Scanner Unit Type 8000 Network Guide

Table of Contents

Other manuals for Ricoh Printer/Scanner Unit Type 8000

Questions and Answers:

Ricoh Printer/Scanner Unit Type 8000 Specifications

Related product manuals