Ricoh Printer/Scanner Unit Type 8000 Network Guide

Message List
111
2
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
WINS wrong scopeID=<Scope ID> An invalid scope ID was used.Use a valid
scope ID.
wpa authentication Failed WPA authentication failed. Check the WPA
configuration.
wpa authentication started WPA authentication has started.
wpa IEEE802.1X started WPA authentication has started.
wpa connecting to authenticator WPA is connecting to authenticator.
wpa link up WPA key exchange has finished, and commu-
nication has been terminated.
wpa probe response doesn't have IE. WPA probe response does not have IE.
wpa success authenticated WPA authentication was successful.
wpa success key received WPA key reception was successful.
wpa waiting for key Waiting for WPA key.
wpasupd start wpasupd has started.
wpasupd stop wpasupd has ended.
Message Problem and solutions

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English