Ricoh Printer/Scanner Unit Type 8000 Network Guide

Special Operations under Windows
116
3
rcp
First, register the printer's host name
in the hosts file.
c:> rcp [-b] \pass name\file
name [pass name\file name...]
printer's host name:[option]
Note
❒ In file names, "*" and "?" can be
used as wild cards.
❒ When printing a binary file, add
the “-b” option.
When using a printer with the host
name "host" to print a PostScript file
named "file 1" or "file 2" located in the
"C:\PRINT" directory, the command
line is as follows:
c:> rcp -b C:\PRINT\file1
C:\PRINT\file2 host:file-
type=RPS
Reference
p.113 “Using a Host Name Instead
of an IPv4 Address”
ftp/sftp
Use the "put" or "mput" command accord-
ing to the number of files to be printed.
❖ When one file is printed
ftp> put \pass name\file
name [option]
❖ When multiple files are printed
ftp> mput \pass name\file
name [\pass name\file
name...] [option]
Follow the procedure below to print
using the "ftp" command.
A Formulate the printer's IP address
or the host name of the hosts file
printer as an argument and use
the "ftp" or “sftp” command.
% ftp printer's IP address
B Enter the user name and pass-
word, and then press the {# Enter}
key.
For details about the user name
and password, consult your net-
work administrator.
User:
Password:
When user authentication is set,
enter a login user name and pass-
word.
C When printing a binary file, set
the file mode to binary.
ftp> bin
When printing a binary file in AS-
CII mode, print may not come out
correctly.
D Specify files to be printed.
The following shows the examples
of printing a PostScript file named
"file 1" in the "C:\PRINT" directory
and printing file 1 and file 2.
ftp> put C:\PRINT\file1
filetype=RPS
ftp> mput C:\PRINT\file1
C:\PRINT\file2
E Quit ftp.
ftp> bye
Note
❒ “=”, “,”, “_”, and “;”cannot be
used for filenames. File names
will be read as option strings.
❒ For “mput” command, option
can not be defined.
❒ For “mput” command, “*” and
“?” can be used as wild cards in
file names.
❒ When printing a binary file in
ASCII mode, print may not
come out correctly.

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English