Monitoring and Configuring the Printer
66
2
❖ Dynamic DNS function setting
msh> dns “interface_name”
ddns {on|off}
• You can set the dynamic DNS
function "active" or "inactive".
• {on} means "active" and {off}
means "inactive".
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
❖ Specifying the record overlap operation
msh> dns overlap {update|add}
• You can specify operations per-
formed when records overlap.
•update
To delete old records and regis-
ter new records.
•add
To add new records and store
the old records.
• When CNAME overlaps, it is al-
ways changed, irrespective of
settings.
❖ CNAME registration
msh> dns cname {on|off}
• You can specify whether to reg-
ister CNAME.
• {on} means "active" and {off}
means "inactive".
• The CNAME registered is the
default name beginning with
rnp. CNAME cannot be
changed.
❖ A records registration
msh> dns arecord {dhcp|own}
•{dhcp}
You can specify the method of
registering an A record when
the dynamic DNS function is
enabled and DHCP is used.
• {own}
To register an A record using
the printer as the DNS client.
The DNS server address and the
domain name already designat-
ed are used for the registration.
❖ Record updating interval settings
msh> dns interval “time”
• You can specify the interval af-
ter which records are updated
when using the dynamic DNS
function.
• The updating interval is speci-
fied hourly. It can be entered be-
tween 1 and 255 hours.
• The default is 24 hours.
Interface name Interface config-
ured
ether Ethernet interface
ip1394 IEEE 1394 interface
wlan IEEE 802.11b inter-
face
To Next Page
Loading...
Need help?
General
