‐59‐
To export the full log files (events, data, configuration) onto a USB:
Insert a USB memory key into the USB port on the side of the Main Communication Unit.
Touch the "Export service files to USB" icon to download the files. Please note that the operation could take several minutes.
Wait until the download is complete before removing the USB key.
NOTE: the service files export icon will only become active once the USB key has been correctly recognised.
EMERGENCY OFF COMMAND
When there is an EPO condition, if you enter the Command Panel, a window will appear that displays the EPO condition.
WARNING: to restore the operation of the UPS, make sure that the conditions which led to the emergency shut-down are no
longer present. After, remove the block by operating both the system EPO button and the slide.
To Next Page
Loading...
Need help?
General
