Riello UPS MULTI POWER MPX - Cabinet Type Selection on Discrepancy; EPO Condition: Partial Switching On

‐68‐
NOTE: The screen for selecting the type of cabinet is also shown in the event of a discrepancy between the
hardware and software settings. In this case, refer to the “MPW-MPX Advanced Configuration Manual”.
In the event that the EPO condition is detected by a sub-system of UPS Cabinets, the system will switch to a state of "partial
switching on" with the BMs of the affected Cabinets locked.
To exit this situation, remove the EPO contact problem and switch the system on again.