EasyManua.ls Logo

Riello UPS MULTI POWER MPX - MPX Environmental and Safety Specifications

Riello UPS MULTI POWER MPX
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
‐88‐
Storage temperature [°C]
-25/+60
Relative humidity [%]
5 - 95% (without condensation)
Installation maximum height
Up to 1000m above sea level
(power reduction 1% for every 100m between 1000m and 4000m)
Pollution degree
PD2
Vibration resistance
1 m/s
2
Overvoltage category /
Protection class
OVC II / class I
Power supply distribution
system
TT, TN,
IT (install a 4-pole circuit breaker on the power supply line)
Short circuit current
ICC=10kA at 415V maximum
Cable entry
Rear from the bottom MPX 130 PWC
Rear from the bottom or top MPX 100 CBC
Colour
RAL 9005
Standards
Safety: IEC EN62040-1 EMC: IEC EN 62040-2 Category C2
Mobile Cabinet
Castors (all cabinet types are sent without PM
3
and BU
4
)
1
Including redundancy
2
Applied conditions
3
PM = Power Module (referring to the 15 kW [MPX 15 PM] or 25 kW [MPX 25 PM] module)
4
BU = Battery Unit
NOTE: all performance quoted in a single row refer to any UPS system configuration from one to five modules operating in
parallel unless specified differently.

Table of Contents

Related product manuals