Risco ProSYS 128 - Page 62

62 ProSYS User Guide
Quick
Key
Function Description
05
Overload
Restore
The Grand Master/Engineer /Sub-engineer/Manager
can use this option to restore the Auxiliary power from
a power supply, power (If overload condition is still
present, disconnect all loads from AUX. Output)
06
Check
Credit
Use this function to receive information by SMS of the
credit level in your Prepaid SIM card. The ProSYS will
send SMS Credit Level Request message (User
menu: Quick Key [4][0][4][1]) to the provider's phone
(User menu: Quick Key [4][0][4][2]). Once the SMS is
received by the provider, the SIM’s credit level is sent
back and displayed on the keypad's LCD display or
sent to the Follow Me (if defined).
07
Reset SIM
After charging a prepaid SIM card, the user has to
reset the SIM Expire Time manually. The time
duration for expiration is defined by your engineer.
3 View
1
Fault
Should be used when the system has detected a
problem, which is evident by the rapid flashing of the
Ready LED, as described on page 14.
2
Alarm
Memory
Allows the viewing of the five most recent alarm
conditions stored by the system.
3
Partition
Status
Allows the viewing of the partitions' status, the faults
in the system and all “not ready” zones.
Pressing on the
key from the Normal
Operation mode will display the status of the partition
to which the keypad is assigned. Pressing the
sequence [CODE]
from the Normal Operation
mode will display the status of all the partitions
assigned to the user code.
4
Zone
Status
Allows the display of all system zones and their
current status.
5
Event
Memory
Allows the viewing of significant system events
including date and time.
Note: The events memory cannot be erased
6
Service
Info
1) Displays any previously entered service information
2) Displays the system software version.