Risco ProSYS 128 - Page 63

ProSYS User Guide 63
Quick
Key
Function Description
4 Maintenance
1
Indications
The indication function allows the Grand Master to
perform a test to the following elements in the system:
1) Keypad test (approximately 3 second test):
Momentarily tests the keypad indicators and the
system's external sounder(s)
2) Speaker (approximately 10 second test) – Toggle
the internal speaker on/off
3) Bell (approximately 20 second test) – Toggles the
external bell on/off
4) Strobe (approximately 10 second test) – Toggles
the strobe on/off
2
Battery
Test
Tests the system's standby battery.
3
Local
Chime Off
Turns OFF a particular keypad's internal sounder for
any function involving the Chime feature.
4
Local
Chime On
Turns ON a particular keypad's internal sounder for
any function involving the Chime feature.
5
Part.
Chime Off
Disables the buzzer for all keypads in the partition for
any function involving the Chime feature. The internal
speaker will be disabled as well if defined by your
engineer.
6
Part.
Chime On
Enables the buzzer for all keypads in the partition for
any function involving the Chime feature. If defined by
your engineer, the internal speaker will be enabled as
well.
7
Local
Buzzer Off
Turns OFF a particular keypad's internal sounder
during both Entry and Exit Delay time periods and all
fire and intruder alarms.
8
Local
Buzzer On
Turns ON a particular keypad's internal sounder
during both Entry and Exit Delay time periods and all
fire and intruder alarms.
9
Diagnostics
Enables to performs diagnostics tests to: BUS zones,
power supply, sounder and GSM/GPRS module.
0
More