66 ProSYS User Guide
Quick
Key
Function Description
NOTE:
Refer to the Access Control User's Manual for more information about the Access
Control functions.
9 Miscellaneous
1 Printer 1 on
Activates printer 1
2 Printer 1 off
Deactivates messages to
printer 1
3 Printer 2 on Activates printer 2
1
Printer
Control
(to control
on-line
printing)
4 Printer 2 off
Deactivates messages to
printer 2
2 Anti-code
Some systems (defined during installation of the
systems) are not ready to Set after an alarm or
tamper condition. To restore the system to Normal
Operation mode, an Engineer code or Anti-code must
be entered. Entering the code supplied by the
technician at this location will restore the system to
the Normal Operation mode. (Refer to page 29)
3
Duress
Restore
Deactivates a latched PO that has been activated as
a result of a duress code being entered.
4
Voice Msg
Customizes the spoken messages that are
announced when the user accesses the system from
a remote telephone. Refer to the Voice Module
Programming and Operations Manual for more
information.
5
Key
Custom
Records a series of commands and assigns them to a
function key. For detailed information refer to page
53.
To Next Page
Loading...
