ProSYS User Guide 65
Quick
Key
Function Description
3
Next Set
Enables automatic Full set of the system at a specific
time within the next 24 hours. Next Set operates for
one time only since the system deletes the setting
activated with.
4
Next Unset
Enables automatic unset of the system at a specific
time within the next 24 hours. Next Unset works for
one time only since the system deletes the setting
after it is acted upon.
5
Scheduler
Enables you to define a weekly program with up to
two time intervals per day, during which the system
automatically sets, activates POs, or prevents users
from unsetting, as described on page 47.
6
Holiday
Enables you to define up to 20 holiday periods and
the partitions that will be set automatically during the
holiday.
7 Engineer Prog
1
Advanced Accesses the full menu of programming options.
2
Selected
Accesses a limited menu of programming options for
the sub-engineer.
NOTE:
Refer to the ProSYS Installation and Programming Manual for more information about
the Engineer Prog functions.
8 Access Control
1
Settings
Defines the door mode for each door and the reader
criteria for each reader in the system.
2
Time
Schedule
Configures the time schedules by which users can
access the system.
3
Group
Access
Defines access to doors for groups of users during
specific time periods.
4
Record
Users
Adds Set/Unset users and Entry/Exit users to the
system.
5
User
Settings
Defines settings for users, including assigning PIN
(Personal Identification Number) codes, assigning
users to specific access groups, and deleting users.
6
Open Door
Remotely opens any door from any keypad that has
previously been defined in the system.
To Next Page
Loading...
