Riso 390 - Page 68

Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
66
14 Minimum print quantity
Specify the minimum number of
copies to be printed from one master.
If a number lower than the specified
minimum number is entered, the
master-making process is not
executed.
You can lock and prevent this setting
from being changed. For more
information, consult your dealer.
0
10
copies
20
copies
30
copies
40
copies
50
copies
15 Beep sound
Specify how an alarm should sound
when keys are operated or errors occur.
• Level 2
A beep sounds at all preset occasions;
for example at the time of key
operations and event generation/end.
• Level 1
A beep sounds only at the time of
error occurrence, setting
completion, pulling-out enabled,
and 2-Up printing interval time.
• Level 0
A beep does not sound at any occasions.
Level 2 Level 1 Level 0
16 Reservation Period
Specify the amount of time for blocking
document data output from a computer
when the machine is not operated.
OFF 15
seconds
30
seconds
60
seconds
17 Semi-Auto(ADF unit)*
1
(available only
with the optional ADF unit)
With “ON” selected, if an original
exists in the ADF unit after printing,
the next master-making process is
executed followed by proof copy, and
then machine operation is stopped.
Important!:
• With “ON” selected for Auto-Process,
you cannot select “ON” for Semi-Auto.
OFF ON
18 Job Separation*
1
Select “ON” when using an Job
Separator (option).
OFF
ON
20 Print Quantity restoration setting*
1
Set the restoration setting for Print Quantity.
Select “ON” when you want to restore the
Print Quantity after printing is finished.
OFF ON
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5