Replacing and Disposing Consumables
Emptying the Master Disposal Box
91
Emptying the Master Disposal Box
1 Pull out the Master Disposal Box.
If the Master Disposal Box lever is locked, slide
the lever to the front to unlock.
Grasp the Master Disposal Box Handle and pull
out the box to the left.
Important!:
• If the Master Disposal Box is padlocked, con-
tact the administrator to undo the padlock.
2 Discard the ejected masters.
Tilt the Master Disposal Box forward and directly
discard the used master into the garbage box (or
bag) by grasping the Push Out Lever.
3 Place the Master Disposal Box into
position.
Insert the Master Disposal Box as far in as it will
go.
Note:
• If necessary, slide the lever to the back to lock
the Master Disposal Box and also have the pad-
lock for further safety.
)p.92
• Dispose the ejected masters according to the
disposal rule of your local community. )p.93
Unlock
Push Out Lever
To Next Page
Loading...
