Replacing and Disposing Consumables
Emptying the Master Disposal Box
92
Tip:
The Master Disposal Box of this machine can be
locked by a padlock or other means so that the
Master Disposal Box cannot be removed, hence
preventing discarded masters from leaking to the
outside. (Purchase an ordinary padlock whose
loop will fit through the hole, which is 7 mm (
9
/
32
inches) wide.)
Important!:
• At the end of printing, the master remains
wrapped around the “Print Drum (Cylinder)” in a
position that enables printing. The master on
the drum (cylinder) is vulnerable to theft even
when the Master Disposal Box is locked. To
prevent leaks, use the Confidential feature.
To Next Page
Loading...
