Riso 390 - Page 70

Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
68
31 Master Quantity Display
The total number of masters
generated with the machine is
displayed.
This number is displayed by two
switching screens; a 3-digit number
preceded by an under bar and a 4-
digit number.
Example: For 1,234,567 masters,
_123Î4567Î_123Î4567
Execute steps 1 through 3 in “Operation Procedure”.)p.70
The total number of generated masters is shown on the Total
Quantity Display.
32 Print Drum (Cylinder) Print Quantity
Display
The number of copies printed with the
current print drum (cylinder) on the
machine is displayed.
This number is displayed by two
switching screens; a 3-digit number
preceded by an under bar and a 4-
digit number.
Example: For 1,234,567 copies,
_123Î4567Î_123Î4567
Execute steps 1 through 3 in “Changing Procedure”.)p.70
The number of copies printed with the print drum (cylinder) is
shown on the Print Drum (Cylinder) Print Quantity Display.
70 Base IP address setting (For EZ3XX
only)
Set an IP address for the machine.
)p.72
80 Create User
Up to 100 users (administrator
included) can be registered to use the
machine by performing the PIN code-
input.
)p.75
Administrator U-1 to U-99 (for user)
81 Management ON/OFF*
2
Enables or disables the User
Management function.
)p.77
OFF ON
82 Disable*
2
Turns machine access permission
ON/OFF.
)p.78
usable
unusable
83 Total Count Limit (per user)*
2
Sets the upper limit of TC for each
user.
)p.79
OFF
1 to 9999
84 Master Count Limit (per user)*
2
Sets the upper limit of MC for each
user.
)p.79
OFF
1 to 9999
85 Reset Total Counter (per user)*
2
Clears the TC for a specified user.
)p.80
Item
No.
Changeable Items
Parameter Selection
0 1 2 3 4 5