Rockwell Automation Allen-Bradley PowerFlex 20P Hardware Service Manual

96 Rockwell Automation Publication 20P-TG002B-EN-P - February 2018
Chapter 3 Part Replacement Procedures
Remove the Bus Bars from a Regenerative Drive
8. Remove the bolt and washer that secures the U phase terminal bus bar to
the terminal isolation bar.
9. Remove the bolts and washers that secure the connecting bus bar to the
U phase SCR modules and remove the bus bars.
=
8
9
9

Rockwell Automation Allen-Bradley PowerFlex 20P Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PowerFlex 20P
Category	DC Drives
Language	English