Rockwell Automation ArmorStart Bulletin 280G - Page 89

Bulletin 284G Programmable Parameters for Sensorless Vector Controllers 4-9
Prod Assy Word 0
This parameter is used to build bytes 0-1 for produced assembly 120.
Parameter Number 13
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 262
Default Value 1
Produced Assy Word 1
This parameter is used to build bytes 2-3 for produced assembly 120
Parameter Number 14
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 262
Default Value 4
Prod Assy Word 2
This parameter is used to build bytes 4-5 for produced assembly 120.
Parameter Number 15
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 262
Default Value 5
Prod Assy Word 3
This parameter is used to build bytes 6-7 for produced assembly 120.
Parameter Number 16
Access Rule GET/SET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 262
Default Value 6
Consumer I/O Size
This parameter maps to the Scanner Tx Size.
Parameter Number 17
Access Rule GET
Data Type USINT
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 8
Default Value 4