R&S PR100 User Manual
MMEMory
. : FILE
. . :DATE? <file_name>
Outputs the modification date of an existing file. In case <file_name> does not
exist, an error is generated: .-292, “Referenced name does not exist”.
Parameters:
<file_name> file: String of characters (comma not allowed)
Result:
<year>, <month>, <day> (See MMEM:FILE:DATE)
Example:
MMEMory:FILE:DATE? “test.txt” -> 2006, 14, 12, 14
MMEMory
. :FILE
. . :TIME <file_name>, <hours>, <minutes>, <seconds>
Sets the modification time of an existing file. In case <file_name> does not
exist, an error is generated: .-292, “Referenced name does not exist”.
Parameters:
<file_name> file: String of characters (comma not allowed)
<block_data> block data
<hours> integer number in the range [0:23]
<minutes> integer number in the range [0:59]
<seconds> any number in the range [0:60]
The seconds are specified by a real number that is rounded
toward the resolution of the device’s internal clock accuracy. The
number 60 is allowed here, because rounding can yield a
number larger than 59.5.
Error:
In case the time is invalid, an execution error -200,"Execution error" is
generated.
Example:
MMEMory:FILE:TIME “test.txt”, 22, 23, 24.09
To Next Page
Loading...
