R&S PR100 User Manual
LAN interface
The instrument is equipped with a 10/100 Base T LAN interface for rapidly reading
data stored on the SD card or for operating the receiver remotely.
Mechanical hardware protection
Mechanical hardware protection for the R&S PR100 at a workstation can be provided
by installing a Kensington lock in the receiver's housing.
SD memory card
The SD card for storing measurements or user settings is inserted into the upper
right side of the R&S PR100.
In order to comply with electro-magnetic
compatibility guidelines (R&TTE), only LAN
cables shorter than 3 m may be used (see
recommended accessories).
To Next Page
Loading...
