Rohde & Schwarz SCV8000E/R - Page 46

Chapter 2 Design and Characteristics
2104.6536.72 - 2.6 - E-1
Operating Modes and Achievable Transmitter Powers
Special features
Every amplifier of the series features two power supplies in active reserve which, like the
two fans, can be replaced in operation. Installing a third power supply in the respective am-
plifier achieves a 100% power supply reserve for the systems R&S SCV8201E and R&S
SCV8301E.
Note Additional information about base and extended amplifiers is located in the R&S VH8001Cx
device manual which is part of the transmitter documentation.
Nominal output power
DVB-T/H ATSC Analog TV
R&S SX801
+ R&S VH8201C1 200 W 300 W 450 W sync peak
= R&S SCV8201 200 W 300 W 450 W sync peak
R&S SX801
+ R&S VH8201C1
+ R&S VH8201C2
200 W
200 W
300 W
300 W
450 W sync peak
450 W sync peak
= R&S SCV8202 400 W 600 W 900 W sync peak
R&S SX801
+ R&S VH8301C1 300 W 450 W 700 W sync peak
= R&S SCV8301 300 W 450 W 700 W sync peak
R&S SX801
+ R&S VH8301C1
+ R&S VH8301C2
300 W
300 W
450 W
450 W
700 W sync peak
700 W sync peak
= R&S SCV8302 600 W 900 W 1400 W sync peak