Roland MDX-40A - Software Installation and Setup

34
Chapter 2 Installation and Setup
Chapter 2 Installation and SetupChapter 2 Installation and Setup
2-3 Cable Connections
Connecting the Power Cord
WARNING
Do not use with any electrical power supply that does not meet the
ratings displayed on the unit.
Use with any other power supply may lead to re or electrocution.
WARNING
Handle the power cord, plug, and electrical outlet correctly and with
care. Never use any article that is damaged.
Using a damaged article may result in re or electrical shock.
WARNING
When using an extension cord or power strip, use one that ad-
equately satises the machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy
extension cord may cause re.
WARNING
Connect to ground.
This can prevent re or electrical shock due to current leakage in the
event of malfunction.
WARNING
Connect to an electrical outlet. Never connect directly to a power
distribution panel or other such xed wiring equipment.
Doing so increases the hazard of re or electrical shock.
Right side
Electrical outlet
Power cable