42
Chapter 3 Basic Operation
Chapter 3 Basic Operation
Chapter 3 Basic Operation
3-1 Types of Emergency Stops to Ensure Safety
How to Perform an Emergency Stop.
Press the Emergency Stop but-
ton.
Operation stops immediately.
To Cancel an Emergency Stop
Turn the button in the direction of
the arrows.
Emergency Stop Due to Opening or Closing the Front Cover
To ensure safety, opening a front cover during cutting or spindle rotation causes an emergency stop
to occur. At the operation panel, the MODELING lamp and the VIEW lamp ash. Operation cannot be
resumed by closing the front cover. In order to resume the operation, restart the machine following
the instruction displayed on the VPanel.
P. 43, “Starting and Quitting”
To Next Page
Loading...
Need help?
General
