Chapter 2 Installation and Setup
2-3 Cable Connections
35
Chapter 2 Installation and Setup
Connecting to the Computer
USB cable
At this time, the connection to the computer must not be made yet. You make the connection to the
computer when you install the Windows-based driver.
Be sure to make the connection according to the instructions on page 38, "Installing the Windows-
based Driver." Making the connection without doing so may cause driver installation to fail and
make use impossible.
Never connect two or more machines to one computer.
For the USB cable, use the included cable.
Never use a USB hub.
USB cable
Right side
Computer
At this time, keep
the cable uncon-
nected.
To Next Page
Loading...
Need help?
General
