68
How to Format SD card
If you want to delete all the patches on SD card, it is suggested to use format function.
1
Press [EDIT] to enter the Edit mode.
2
Press [SELECT] or [SYETEM] to select SD CARD.
3
Use PATCH/VALUE [-] or [+] to select FORMAT. Press [ALL/ENTER]
Format SD Card
Sure? Yes
4
The following confirmation screen will be shown.
All data on SD card will be formatted, including other les you stored on it. Please make backup for
your les if necessary.
6
Use PATCH/VALUE [-] or [+] to toggle between ‘Yes’ and ‘No’, press [ALL/
ENTER] to confirm
NOTE
To Next Page
Loading...
